Форум Подсветка потолка.Pro-Remont.com Forum Lights ceiling.
Forum Lights ceiling. (communications-20)
Theme : Lights ceiling. Hello All! Who did something backlit ceiling? Why and how better to do? What light is generally used? What better use bulbs? If someone did Welcome please. Can I make light ceiling by poluoritanovyh ceiling cornices? It does not burn up and rasplavitsya? Would you tell me how much (min. space) to do a gap between the ceiling and ceiling CT76? P.S : Qualitative poluoritanovye cornices and decoration company Gaudi Decor? Thank you. ---- Sincerely, Nikolai
Subject : Re : Lights ceiling. It was a sorry jihad advertising or awkward question? On the technical side, not too many options, rather than say fluorescent lamps options, I personally do not know. If the course is not just to look exotic visual effects instead of uniform illumination. Realized options in kind, I saw only giprochnom performance-very happy. Option with polyurethane profile hanging in the Maxidom on the bench. Looks good, but how it will look in a real room-known features. And there are a couple of design issues in my opinion ... Inclines bracket lamp-giproke produced in the open edge niche, it easy to get up and change the lamp if that. The foam same light as will be lying inside-profile proplavit it has certainly not proplavit (running hot and does not so much), but pylesbornik there will be a further, deeper vacuum cleaner fruit, and lamp change inconvenient. Can bracket with a lamp do? Gap-match probably experimentally? I liked the idea.
Subject : Re : Lights ceiling. Doing something like one. Lamps were T5 (mm) at 14, 21, 28 Tues. Electronic ballasts under them. Standard metal holder with a lamp and end the chamber. Nothing strengthen do not need. All of this is simply placed in the CT76, is easily removed and washed. Distance to the ceiling of 10, see
Subject : Re : Lights ceiling. If the backlight is used as a ceiling lighting can be used fluorescent lamps if it is conceived as a soft light lutshe use sveto-provod.Unego several advantages. He lyuminests softer. , No shadows on the ceiling of artillery tubes, many colors, and so on.
Subject : Re : Lights ceiling. luminescent lamps benefit of the many different now. are collected in a conversation with adapters and produced without stains on the ceiling. also saw good and bad options for additional illumination cold struck.
Subject : Re : Lights ceiling. Thank you for your reply. That to me was, I try to figure out how to make a backlit ceiling. I need uniform illumination. It is a pity to see where there Voronezh. And so can the people who have the photo of options poliuritanovym profile? It is my understanding there is no other option, I have two-tiered ceiling, and to mould the polyurethane ceiling CT76 and it is put under the light bulb. Well krepezh lights probably can be done to polyurethane takoy-zhe like to GKL. The main message, as has been done. I do photo or instruction as men do, or how to do backgrounds, and how to strengthen bulbs. Is that mean? Thank you. ---- Sincerely, Nikolai
Subject : Re : Lights ceiling. And it was not just rassplavitsya if put in a lamp rounds at CT76 polyurethane ceiling? All bulbs are connected and consistently? Would you tell me how much everything from light bulbs to light bulbs to obtain uniform illumination ceiling? If a consistent pattern connecting light bulbs for illumination, the withdrawal of any of a light bulb, is not the whole lights? So, I understand, or not? If because of a light bulb, can fly all the ceiling light, can circumvent this? Thank you. ---- Sincerely, Nikolai
Subject : Re : Lights ceiling. milord here I have a directory of the company you polyurethane mouldings decorations are so distance from the ceiling to suggest a minimum lamp choosing the lower edge of the inner tubes to the bottom wall cornice detector to the side wall cornice mm distance between the lamp E14 (max 15vt) at least 500mm. apologize in words that can not be changed Nixon ...
Subject : Re : Lights ceiling. P.S. look at me sent out printed directory. can have an electronic version ....
Subject : Re : Lights ceiling. Do not worry-not rasplavitsya :) Between the better it will build the wall is like ammunition should be rigidly fixed, so prikruchivaete ammunition to the wall, then insert tubes, and then check the glue CT76. From just the opposite-all bulbs are parallel, so one way of a entails pogasanie entire ceiling. But remember - luminescent lamps are not just happen, but through the choke (ballast) and the start-integration scheme painted on each corner and at the same start normally. Wiring and starters to be at the same power as the light, burn or otherwise have long been removed. Unfortunately, this set needed for each lamp personally ... There are options for the two lamps, but this limit. Recommended search option with electronic ballast, as in modern energy-saving lamps, then you get mass pluses : - a significant increase in lamp life (normal time for six months, daily work, then problems begin with the lighting, then they are no-lamp light up) - instant ignition Lack OFF (for the usual luminescent dislike) In principle, such a ballast payaetsya for 15 minutes, "Radio" even scheme, but it does electronics know ... As for the distance, I would certainly put a lamp in the interface-the interface that is, without delay. Accordingly poslabee lamps, and it would not lose sight of a brightness :)
Subject : Re : Lights ceiling. Explain please, what dyuralayt and what it's like? I understand that a tape recorder; But neponimayu than it is better / worse than regular bulbs to achieve even lighting. Can link / URL / description anyone has this dyuralayt. They say they do well backlit ceiling. Thank you. ---- Sincerely, Nikolai
Subject : Re : Lights ceiling. Dyuralayt or bulbs, it is better / worse if choose between them? Dyuralayta says that resource work (more than 100,000 hours) is the same for almost 11 years. Is it easier? But the question is, will be better or not dyuralayt. Thank you. ---- Sincerely, Nikolai
Subject : Re : Lights ceiling. Neon : This is a good picture of neon : but luminescent research laid. not neon.
Subject : Re : Lights ceiling. Option ceiling illuminated with neon : Sincerely, Specialist.
Subject : Re : Lights ceiling. But options with color dyurolaytom : Sincerely, Specialist.
Subject : Re : Lights ceiling. Continued dyurolaytom options : Sincerely, Specialist.
Subject : Re : Lights ceiling. A bright light colored dyurolaytom (personal power packed in a two-conductor) : Sincerely, Specialist.
Subject : Re : Lights ceiling. Heating a twist minimal (40-50S), why risk failure, and there is no melting. The advantages : low cost, ease of installation, long life, the diversity of color, the possibility of placing a minimum clearance (~ 3cm). No need for complicated structure ceilings with great opuskom and potaem to install lights-edge ceiling mouldings can be closed, and the walls frieze itself can be placed on a wall mouldings indented from the ceiling, low power, continuity boyfriend Line (pictured night lighting child apparent gap is occurring in the frame with a lamp holder, hanging from the ceiling in the center of the room). Of the possible shortcomings : not a bright glow. Sincerely, Specialist.
Subject : Re : Lights ceiling. Let me say that this issue really helped me make the Ceiling construction. Its construction, I described in my blog : Or are references to all of the messages are simply assembled here : I hope this helps someone. And if someone-something advice gratefully listen to
|
