Ремонт потолка    Натяжные потолки: материалы, установка, уход, дизайн и ценыPro-Remont.com Repair ceiling Slack ceilings : materials, installation, maintenance and design, prices

Slack ceilings : materials, installation, maintenance and design, prices

Leaf ceiling is a standard PVC film different invoices (opaque, semi (Satin), glossy (lacquer), metallic, suede, marble, leather, etc.). Its thickness up to 0.17 mm, the weight is about 230 g/m2. Despite these parameters, Leaves for tripwires ceiling is manufactured from solid materials.

Structural characteristics of the coating to set it perfectly, or exactly inclined, or in the same category, and can be sharp or smooth transitions from one plane to another. Trip ceiling can be installed in any room configuration. This technology has been successfully applied to create as rectilinear and curvilinear surfaces, and bulk structures. They may create "sky", "flickering stars", "light painting" ... A lot of color stretching ceiling (more than 200) and the ability to agglutinate strips of different shades with a large selection of invoices designers provide ample opportunities for fantasy. You can print any image or cause film to the customer.

Slack ceilings relevant in the new construction, as in the early days of any building is inevitable shrinking, and there are cracks. This coating has good thermal and sound effects, as well as between the slab floors and ceiling formed stretching air interlayer (and, of course, no heat better than air).

Slack ceilings are not affected by moisture, do not degrade, they not start the fungus, this is not preet not decomposes, is not oxidized. Whatever the humidity in the room (up to 100%), even though on the wall will struitsya condensate, the ceiling will not be affected. Trip ceiling storing static electricity, so it has not lipnet dust, it pozharobezopasen not absorb odors. Plus the entire lifetime of slack ceiling is an average of 30 years (10 years warranty).

Installation

Mounting tension ceiling is at the stage finish repairs, the clean room. But all technical issues (choice of material, geometry, the method of fixation, lighting, walls version) should be negotiated at the beginning (before the work).

Before a trip, "a" ceiling being prepared is not necessary, unless the stiff brush to clean the places to wash puzyritsya or flaking. When Leaves natyanuto, it hides all the defects, irregularities and cracks.

Producing precise metering facilities, and configuration of the ceiling can be of any complexity. Drawing sent to the factory, where it was manufactured Leaves ceiling. Ceilings are mounted on domestic production technology "baget-garpun" : perimeter welded to a flexible substrate for the attachment of top-tip, on the perimeter of the premises at desired levels set krepezhno-dekorativny-profile picture. At the core ceiling, where should be a point of light, mounted upright, which set and lighting. The plate is heated by heat gun, the film becomes a pliant, it kicked in and pick tip frame with the help of special tools.

The minimum distance from the main floor to ceiling to 30 mm (compared to Ceiling, 80-100 mm).

Slack ceilings easily dismantled (in dealing with leaks, the additional work, etc.). And re-installed (with a fully restored its previous size). And if in a few years, the employer wants to change the color of the ceiling, constructed and installed a new line at the same picture.

Publicity

Slack ceilings provide for both internal lighting, and sample conventional chandeliers through specially designed holes in the fabric. The equipment tripwire fixed ceiling lighting fixture each (usually, the point sources) through a separate hanger is attached to the main floor and in line for slotted holes that okleivayutsya perimeter special insulation ring. The tensioning ceiling lamps can be used up to 60 W (for the bulb) and 35 W (for halogen). To install lights more power you need more insulation between the shell and Leaves ceiling lamp, or simply rasplavitsya film.

Care

Trip ceiling easy to care when it ceases to look like new, wipe it dry towel, and he becomes the new. And it can be very soiled wash water and soap (dirt, dust), 10% coverage solution smell alcohol or liquid for washing windows (fat), and then wipe dry.

Shortcomings

In fact, and the disadvantages of stretching ceilings. First, the film was "afraid" sharp objects (though hardly anyone will think in the head from the ceiling with so), second, stretched ceiling relatively expensive (the cheapest stretched ceiling at the moment is about a 30. E. 1 m2 with the delivery and installation, with the complex design of increases up to 80 cu m per 1). And yet : it is unlikely that work on the stretching device ceiling could do by itself, the work requires not only special equipment and materials that are not available in retail stores, but also skills.

Guidelines for Setting

High Gloss Leaves pull of the premises, give him superficial, solemn form. Frosted Leaves absorbing unwanted glare and reflection, retain their color regardless of the color of the interior. Leaves "Satin", a kind of flat art, is the particular microstructure surface : "satin" Leaves causing micro, which makes it similar to the surface of the fabric. The changes reflect these differences and achieve different visual effects. Translucent Leaves provide balanced coverage ceiling hidden light sources. Leaf "marble" reproduces the unique natural stone figure. "Metallic" leaves out the contemporary style rooms, a secure business environment.

Perforating tripwire ceiling can be done in any material, which will improve Bären properties premises.

The author of the article : Sergey Boiko
Source : , N 21 (79), June 2005